佳能MP145/MP150/MP170 常见错误（中英文资料）

MP150错误代码E 故障原因
E2 这可能是由各种因素引起的。请确认以下操作，然后再次进行打印：
1) 请确认没有放置不可用的纸张。
不可用=纸张
2) 请确认纸张放置正确。
如何在自动供纸器中放置纸张
3) 请确认使用推荐的纸张并且自动供纸器中所放的纸张数量在限度以内。
推荐的纸张/装载限度/打印面
4) 清洗送纸滚轴可能解决问题。
如何清洗送纸滚轴 (不使用计算机)
如何执行进纸滚轴清洗 (Windows)
E3 清除卡纸。
如何清除卡纸
如果卡纸频繁发生，请查看以下内容：
1) 请确认本机内部没有异物。
如何取出异物
2) 请确认没有放置不可用的纸张。
不可用的纸张
3) 请确认纸张放置正确。
如何在自动供纸器中放置纸张
4) 请确认使用推荐的纸张并且自动供纸器中所放的纸张数量在限度以内。
推荐的纸张/装载限度/打印面
E4 类别 : 错误信息
墨水盒已空。要取消打，按[停止/重置]按钮。要继续打印，按[黑白]或[彩色]按钮。打印结束后，更换空的墨水盒。使用空的墨水盒打印可能损坏本机。
如何安装或取出墨水盒
支持的墨水盒/可印的页数限制
E5 类别 : 错误信息
描述 : 发光二极管显示屏指示
墨水盒可能没有正确安装，或者安装了不适合本机的墨水盒。为本机安装合适的墨水盒。
如何安装或取出墨水盒
支持的墨水盒/可打印的页数限制

请确保安装两个墨水盒，即使将打印机设置为仅用一个墨水盒进行打印。如果其中一个墨水盒缺失，该错误将会出现。
E7 墨水盒未安装在正确的位置。将每个墨水盒安装在正确的位置。
如何安装或取出墨水盒
E8 废墨收集器将满。按下[黑白]或[彩色]按钮清除此错误。废墨收集器变满之前可以执行打印。如果废墨收集器已满，请与当地的服务中心联系，更换废墨收集器并进行打印机维护。(备注)废墨收集器是打印机内部的一个部件，用于收集清洗等操作中使用的墨水
E9 本机无法与连接的相机通讯。断开本机与相机之间的电缆线以清除错误。请确认以下内容，然后重新打印。
如何从数码相机直接打印照片
1) 请确认使用的相机支持 PictBridge 或佳能“直接连接数码相机打印(Bubble Jet Direct)”。如果相机不支持其中之一，本机无法从相机直接打印。
2) 将相机连接到本机前，将相机设置为 PictBridge 打印模式。对于部分支持 PictBridge 的相机，这是打印前必须的。有关连接到本机之前及之后所需步骤的更多信息，请参阅相机的使用手册。
3) 一段时间内相机可能没有反应。重新连接相机和本机之间的电缆线。
E1,4 可能安装了不适合本机的墨水盒。安装适合本机的墨水盒。

支持的墨水盒/可打印的页数限制
如何安装或取出墨水盒
E1,5 可能安装了不适合本机的墨水盒。安装适合本机的墨水盒。
支持的墨水盒/可打印的页数限制
如何安装或取出墨水盒
E1,6 可能安装了用过的墨水盒，或者墨水盒已空。更材水盒。
如何安装或取出墨水盒
支持的墨水盒/可打印的页数限制
按[黑白]或[彩色]按钮，可以不用更换墨水盒继续打印。但是，由于无法正确检测剩余的墨水量，检测剩余墨水量的功能将不能工作。
E1,9 类别 : 错误信息
描述 : 发光二极管显示屏指示
本机扫描文档失败。请确认文档以正确的位置和方向放置在稿台玻璃上，然后重新扫描。
E2x 关闭本机，从插座上拔下电源插头。大约十分钟后，重新插上，并开启本机。如果问题没有解决,本机可能需要维修。请与当地的支持中心联系。
E3x 关闭本机，从插座上拔下电源插头。大约十分钟后，重新插上，并开启本机。如果问题没有解决,本机可能需要维修。请与当地的支持中心联系。
E4x 关闭本机，从插座上拔下电源插头。大约十糁雍螅重新插上，并开启本机。如果问题没有解决,本机可能需要维修。请与当地的支持中心联系。
CANNON Printers MP150/MP160 ERROR CODE

好像老有人问错误代码对应的故障原因

E9 The connected digital camera / video camera does not support Camera Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet中国喷墨论坛-喷墨打印技术应用领域交流中心 w&o F I)Q!Q Z
E22 Carriage error
E23 Paper feed error中国喷墨论坛-喷墨技术应用-数码影像-数码印刷-数码印花 @ D0_%f Z
E24 Purge unit error
E25 ASF(cam) sensor error中国喷墨论坛- E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full中国喷墨论坛-喷墨打印技术应用领域交流中心9B琇#O c O Z {/} C
E28 Ink cartridge temperature rise error -中国喷E29 EEPROM error
E33 Paper feed position error E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
? CANON RESETTERCanon MP160 , MP145
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
 solid (2008-8-13 17:44:34)
CANON RESETTERCanon MP160 , MP145
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error